2" Inch Caster 77 lbs Fixed Thermoplastic Rubber Top Plate

2" Inch Caster 77 lbs Fixed Thermoplastic Rubber Top Plate

Item Name: 2inch-Caster-003

Wheel Diameter: 50mm

Wheel Width: 17mm

Wheel Diameter: 2" Inch = 50mm

Overall Height: 65mm

Overall Height Inch: 2.559"

Mounting Type: Top Plate

Top Plate Size: 58mm x 48mm

Hole distance: 46mm x 35mm

Wheel Core: Thermoplastic Rubber

Tire: Thermoplastic Rubber

Bearing type: Plain bearing

Load Capacity: 77 lb

Mounting: Fixed

Temperature Range: -40 to 180 F

Mounting 2inch-Caster-003 is the solution of making your project to move around by pushing. This caster is rolled on a wheel that has 50mm diameter/1.969" inch inches. Dimensions of the caster wheel is 17mm (.669" inch). The Caster with the wheel from end to end is 65mm = 2.559" inch. Top Plate is the method of installing the caster to your equipment, the dimensions are 58mm x 48mm with the holes distance of 46mm x 35mm. Low drag was achieved by a Thermoplastic Rubber core on a Thermoplastic Rubber tire spinning freely with a Plain bearing. Here come the maximum load that should be applied on every wheel, remember to add safety factor, when calculating the load capacity 77 lb with a Fixed type. Temperature range = -40 to 180 F. Enjoy our 2inch-Caster-003, we wish all the best in your project.